Audi VW Skoda DRL LED Control Module — 4G0.907.397.D / 4G0.907.697.D Replacement
OEM Replacement | Plug & Play | 2-Year Warranty | Express Delivery
Guaranteed safe & secure checkout
Shipping is Included in the Price
OEM Replacement | Plug & Play | 2-Year Warranty | Express Delivery
Guaranteed safe & secure checkout
Shipping is Included in the Price
This is the direct OEM replacement for the 4G0.907.397.D and 4G0.907.697.D DRL (Daytime Running Light) LED control module. It is fitted to a wide range of Audi, Volkswagen, and Skoda vehicles from 2011 to 2019 equipped with factory LED Daytime Running Light systems.
It restores reliable, flicker-free operation to your factory DRL system. No coding, no rewiring — plug straight in and it works.
The 4G0.907.397.D and 4G0.907.697.D are the exact same control module unit with different part number formats used interchangeably by Audi and VW. Both are completely interchangeable, and our replacement matches either original specification exactly.
DRLs that fail to turn on, flicker on startup, or display a warning light on the dashboard are the most common signs of a failed DRL control module. Water ingress and condensation inside the headlight housing are the leading causes of premature failure. If swapping the module from the working side to the non-working side causes the fault to move, the module is confirmed as the fault.
1 x Module unit. If both sides are affected, add 2 to your cart.
Always verify by matching the part number on your original unit before ordering.
Not sure if your vehicle is listed? Email a photo of your original module label to [email protected] and we will confirm fitment for you.
These two modules look similar but are different revision levels. Check the part number printed on the label of your original unit before ordering:
Before replacing the module, check whether the fault is consistent on one side only.
If the DRL fails to turn on, flickers on startup, or triggers a dashboard warning, the control module is the most likely cause. Swap the module from the working side to the non-working side (if accessible). If the fault moves with the module, the module is confirmed as the fault. If the fault stays on the same side, the issue may be a different fault.
Pro Vision Lighting™ has over 20 years of experience supplying OEM replacement automotive lighting to Australian motorists, workshops, and auto electricians. Fast Express Delivery, 2-year extended warranty, and expert support by phone or email.
It fits Audi A1 8X (2015–2017), A3 8V (2012–2019), A4 B8-8K (2011–2015), A5 8T-8F (2011–2016), A6 C7-4G (2011–2017), A8 D4-4H (2014–2017), Q3 8U (2011–2018), Q5 8R (2013–2016), VW Touareg 7P5 (2014–2018), Skoda Octavia III 5E (2012–2016), and Skoda Yeti 5L (2013–2017).
They are the exact same DRL control module unit with different part numbers used interchangeably by Audi and VW. Our replacement is compatible with either original. Always verify by matching the part number printed on the label of your original unit before ordering.
One DRL not turning on, flickering on startup, or a dashboard warning light are the most common symptoms. Swap the module from the working side to the non-working side — if the fault moves with the module, the module is confirmed as the fault.
These are different revision levels of the Audi/VW DRL control module. The .D / .697.D revision (this product) is the later unit fitted to a similar vehicle range. The .P / .R is an earlier revision. Check the part number on your original unit to confirm which revision you need before ordering.
No. This OEM replacement module is completely plug-and-play. It connects directly to your vehicle's factory wiring harness without the need for any dealership programming, coding, or modifications.
Note: HTML is not translated!