High-powered 18000-lumen LED globe upgrade for high beam, rural driving, farm vehicles, 4WDs and off-road use. Available in H4 H/L, H7, H8, H9, H11, HB3/9005, and HB4 9006.
Guaranteed safe & secure checkout
Shipping is Included in the Price
The Extreme PLUS G3 P18 is Pro Vision Lighting™’s high-powered halogen-to-LED globe upgrade for drivers who want maximum output from their high beams. With a factory-rated 18,000-lumen P18 output, it is designed primarily for rural driving, farm vehicles, four-wheel-drives, and off-road applications where strong forward illumination is essential.
Available in H4 H/L, H7, H8, H9, H11, HB3/9005, and HB4/9006, the P18 is a specialist high-output option rather than a generic globe for every application. Check your existing halogen globe type and confirm there is adequate space behind the headlight before ordering.
The P18 range is available in H4 high/low, H7, H8, H9, H11, HB3/9005 and HB4/9006. It is primarily recommended for high beam. It can also suit selected low-beam applications, but low-beam fitment should be assessed case by case because the headlamp optics, bulb type, available housing space, correct globe position and headlamp aim all affect the final beam pattern.
For most standard halogen low-beam upgrades, Quick-Fit GEN5 LED Headlight Globes are our usual starting recommendation. For some vehicles with sensitive electrical systems, bulb-monitoring warnings or more demanding fitment requirements, the Extreme Plus G3 with dedicated CAN-bus driver may be the better option. Contact us with your vehicle details before ordering if you are unsure.
Before ordering: Make sure there is sufficient room behind the headlight for the LED globe, driver and cooling system, and that the original dust cap can close correctly after installation. Some vehicles may also require a retaining adapter or a replacement dust cap. If you need help, send us a photo of your original globe and the rear of the headlight.
The easiest way to confirm the correct globe type is to check the marking on your existing halogen globe. You can also check your owner’s manual, ask your dealer using your VIN, or use the OSRAM Globe Application Guide or NARVA Globe Application Guide. If you are still unsure, email clear photos of your existing globes, your vehicle details and whether you are upgrading low beam, high beam or fog lights to [email protected], or call 1300 775 359.
Low beam needs the most care because the beam pattern must remain controlled and must not create glare for other road users. Brightness on paper is only one part of the result: effective light and cut-off pattern depend on the original headlamp optics, correct globe position, thermal management, the lens or reflector, and correct headlamp aim. The P18 is primarily a high-beam product; contact Pro Vision Lighting™ before choosing it for low beam.
Always confirm fitment, install the globes correctly, check your headlamp aim and ensure your vehicle meets applicable state or territory road-use requirements. For vehicle-specific advice, contact Pro Vision Lighting™ before ordering.
The P18 is designed primarily for customers who want high-output high beam for rural driving, farm vehicles, four-wheel-drives and off-road applications. It is available in H4 H/L, H7, H8, H9, H11, HB3/9005, and HB4/9006.
Some low-beam applications may be suitable, but the P18 is primarily a high-beam product. Low-beam suitability depends on bulb type, headlamp optics, available housing space, correct globe position, and beam aim. Contact Pro Vision Lighting™ with your vehicle details before choosing P18 for low beam.
The P18 is available in H4 H/L, H7, H8, H9, H11, HB3/9005 and HB4/9006. Check the marking on your existing halogen globe, your owner’s manual, or send us a photo if you need help confirming the correct type.
Check that there is enough space behind the headlight for the LED globe, micro-driver and cooling system, and that the dust cap can close correctly. The single-beam base is approximately 35 mm deep, while H4 H/L is approximately 45 mm deep. Send a photo of the rear of your headlight if you need help checking fitment.
Yes. The P18 is CAN-bus compatible. Vehicle electrical systems vary, so if your vehicle is known to have particularly sensitive bulb monitoring, contact Pro Vision Lighting™ so we can recommend the most suitable option.
Each kit includes two P18 LED globes, two micro-drivers and installation instructions — a complete upgrade kit for two headlights. Express delivery is included in the price Australia-wide.
Note: HTML is not translated!
